'arises, But if you run simple calculations it soon becomes clear
SEE THE SYSTEM:
INFRARED RADIATION
The oldest and the most known source of heat by radiation is the sole.Ogni day by the sun, we are in contact with the infrared waves that heat the environment that we circonda.Il sun gets its energy from the rays IR in the nucleus. In contrast to UV rays, infrared rays are beneficial for health. Even a growing number of incubators are equipped with infrared heating systems to heat neonati.Un other means of heating to heat waves is the old tiled stove. The most suitable place where to put a tiled stove, the inner wall of a room so that it can radiate heat as much as possible throughout the surface of the outer wall. The intense radiant heat of the stove warms the inside of the outer wall, thereby increasing the surface temperature of the environment while maintaining the radiant panels are fresco.I innovation. But no more wood for electricity in the sun home giorni.Solo all materials that meet the highest requirements of quality, durability and environmental compatibility are used for the construction of the panels. These products are certified by TUV (German Institute for Quality Mark), IGEFI (International Institute for Science electrosmog) and CE mark (European Community). DIFFERENCES
TRARISCALDAMENTO CONVENTIONAL AND RADIANT
Unlike the phenomenon of convection with radiant heat (radiant heat) energy is transmitted not through air but through electromagnetic waves, so the air between the heat conductor and the recipient does not heats. In most cases, the man prefers to radiant heat (also called thermal radiation) heat produced by the phenomenon of convezione.Molte people mistakenly believe that the sensation of heat or cold air temperature depends exclusively on the premises. An experiment in the laboratory of John B. Pierce, USA clarifies the purpose of an intelligent heating system: A group of people in an environment with a temperature of 50 ° C produced by hot air and cold walls are very cold while the same group of people in a room with a temperature of 10 ° C and heated walls start to sweat. (Source: Techn. Info "Radiant Energy - Energy Sources - was re-discovered, TT Technotherm GmbH, Nürnberg). A demonstration of what we said an example from the natural world skiers and climbers do not suffer from the cold despite the air around it is extremely cold. The reason for this is that they are surrounded by heat waves that come directly from the sun or are reflected from the environment (snow, stones, earth).
WELLNESS CORPOREOLe infrared heat waves that are transmitted from the panels hit an object in the room (wall, ceiling, floor, furniture) and this can be absorbed or reflected, as reflected, in turn, affect another object until it is absorbed . To understand the spread of waves of infrared heat compare them to the rubber balls that are thrown into a room. This jump in everywhere and every time you hit a certain object will lose some of their energy. The rubber balls (infrared heat waves) will jump up and down off until their energy COST OF HEATING
infrared radiant elements heat up less than 20% of the air surrounding objects and more than 80% of walls and furnishings ensuring warm, dry and free of mold (furniture, objects, pieces of exposure). This explains why in ancient times before the introduction of systems for air heating Hot maintenance work environments and furnishings were undertaken about every 20 years thereafter every two years while work was needed to kill molds, fungi, dirt and surface of furniture, color layers, dirt in the lower reaches, lifts of salt on the walls, permanent change in the melting and crystallization, cracking, scordatura of musical instruments, corrosion of surfaces and components walls or metal objects. This situation means that maintenance work be carried out in a house should be made frequently with high costs could be avoided by using a different type of local dry riscaldamento.I employing the technique in radiant heating are those that provide a greater savings assoluto.Con in this type of heating you can to lower indoor air temperature of about 2 ° C. 1) this means less heat loss caused by the walls - as a minor difference temperatura2) less loss of energy caused by the change of air (ventilated areas, cracks and crevices) lowering the temperature of 1 ° C allows energy savings of around 5%. With 2 ° C will have an energy saving of around 10% will be consumed, and then stored in the first ambienti.Le heat waves heat the top layer of the wall and this energy is mostly radiated back into the room. Only 1 / 6 of energy through the wall directly to the outside and disperde.Grazie the combination of a lower temperature environments, the high temperature of the walls of reduced production of dust and moisture in the air there feels more at agio.In particular, to consider the fresh, dry and free of dust that you will breathe in this environment. This is the basic premise to breathe in a healthy and light. These considerable advantages to be found in every room: living room, bedroom, office, etc..
COSTS RISCALDAMENTOIn basis of research carried out on the market relating to costs for the construction of heating, we made the following tabella.Il comparison was calculated for a period of 15 years, for an apartment of 80 sqm structurally well isolato.Si note the difference between the panels and other types of radiant heating which leads to a saving of 48% compared to heating oil.
Also bear in mind that apart from the methane as the electricity bill is paid through (after two months and use only what is used), gas oil and LPG are prepaid at time of filling the storage tank (including fuel that goes on). The radiant panels also do not need: - maintenance-tank or boiler-room for the storage of fuel-fireplaces
Description and power (KW)
Cost for 8 hours of use
IHS 900 to 0.90 € 1.15 KW
IHS 600 - 0.60 € 0.77
IHS 400 KW - 0.35 KW
IHS € 0.51 300 - 0.30 € 0.38
IHS 280 KW - 0.28 KW
IHS 150 € 0.36 - € 0.17 KW 00:13
ROLLINGWAVE - 0.7 KW € 0.90
calculation with price equal to € 0.16 per KWh excluding VAT for private
possomo not do magic, but the system is able to keep walls dry and dry, so the result is a low thermal conductivity and low energy costs.
0 comments:
Post a Comment